GO OFF-GRID WITH OUR SOLAR KIT
QUICK SET UP
With 95% of the setup and wiring already completed, installation on-site takes less than 20 minutes.
RELIABLE
Assembled in the UK, our solar system has undergone years of rigorous testing and development.
ONE SOLAR KIT
EVERY CAMERA SYSTEM.
The Burgess Solar Power Kit is compatible with every time-lapse camera system we offer, including our 4K, 6K and 8K systems. Simply choose the camera that best suits your project and add solar power for reliable off-grid deployment.
PRE-BUILT &
PRE-CONFIGURED.
We integrate your networking hardware into a GRP (Glass Reinforced Polyester) cabinet with IP66 rating and IK10 impact resistance, designed to accommodate your 12V battery at the base. All components come pre-configured and wired into the charge controller for rapid deployment.
- GRP CABINET IP66 & IK10
- 4G ROUTER
- POE SMART POWER
- 150 WATT PANEL
- 90AH 12V BATTERY
- MPPT CONTROLLER
- 20M DATA CABLE
RAPID
DEPLOYMENT.
Simply position your 12V battery inside the cabinet. Connect the red and black cables from the solar charge controller, which come equipped with terminal rings, to the corresponding terminals on your battery for quick and secure attachment.
Connect the solar extension cables to the connectors on your solar panel cable. Your solar system is now fully operational.
The 4K Ultra HD time-lapse camera is powered by a DC input POE injector, which delivers power over a data cable. The camera is pre-connected to one end of the data cable. Simply feed the other end of the cable through the cable gland and into the ‘out’ port on the POE injector.
SOLAR
PANEL SETUP.
To protect the solar panel during transport, it is shipped in its protective packaging and cannot be pre-assembled to the ground mount. Simply assemble the supplied ground mount, attach and position the solar panel, then connect it to the system. Full step-by-step assembly and setup instructions are provided.
TIMER SETUP
HIGHLY RECOMMENDED.
For maximum battery efficiency, we recommend setting the load output timer on the solar charge controller. Setup takes less than five minutes. Simply download the app, connect to the controller via Bluetooth and choose your operating hours. Most time-lapse projects only capture during working hours, so there is little benefit in powering the camera overnight. Setting a schedule helps conserve battery power and improve off-grid performance.
RAPID-DEPLOY SOLAR KIT
Install in under 30 minutes-
GRP CABINET IP66 & IK10
-
4G ROUTER
-
SMART POE POWER
-
MPPT CHARGE CONTROLLER
-
12V 90AH BATTERY
-
150 WATT SOLAR PANEL
-
SOLAR PANEL GROUND MOUNT
-
PLUG & PLAY EASY SET UP
-
ZERO CONFIG DEPLOYMENT
POWERED
ALTERNATIVE.
Before committing to a solar solution, it’s wise to confirm whether existing power sources, such as site cabins or generators, are available for use. Additionally, it’s important to note that with our powered time-lapse systems, only our 4G box requires direct power. The camera can be as far as 100 meters away, connected to the Box with an outdoor data cable that not only transmits data but also powers the camera.
RECENT
PROJECTS.
Feedback from our clients.
Fantastic service, great quality products and support. I cannot rate Paul and his team high enough for their professional services and expert knowledge.
Many 5 Star Reviews.
We have been working with Burgess since 2018 and can’t fault the customer service and expertise. Their team have always been available to help and assist when needed. We have already recommended their service to a number of our clients, and why we look forward to continuing working with them in the future.
