Solar and Battery Support

Finding local power will ensure a faster installation. With our system its only our “comms box” that needs direct power. Within the comms box (grey enclosure) is a small POE switch. From that a single data cable (supplied) powers and connects the camera. Therefore the camera can be 100’s of feet from a mains power supply.

For applications where solar is the only choice we make our cellular, networking and camera hardware 12V DC Input ready. The camera and router have a combined 20W output. This is the maximum, typically its much less. Even so, a single 120W panel would be a little on the light side so we advise on 2 x 120W panels, as pictured below. Pole mounting the Panels is also an option.

Share this post

Leave a Reply

Your email address will not be published. Required fields are marked *